Membre

Fiche Membre

En un clic !

Thématiques de recherche
Pôles d’expertises
Nos équipes
Formation par la recherche
- Doctorats
- Masters
HDR
Thèses
Publications

Composante(s) d’expertise Pôle associée(s)

CCS

Automatisation des processusGénie industrielGestion de production

Expertises équipes

Ingénierie numérique appliquée aux systèmes industrielsIntelligence artificielle et optimisation pour les systèmes de productionPilotage, supervision et surveillance des systèmes industrielsSystèmes industriels cyber-physiques et industrie intelligente

Alain Bernard

HDR

Émérite – Professeur / professeure des universités

Equipe : CPS3

Employeur : Centrale Nantes

Expertises :

Coordonnées

Email :

Adresse(s)

Informations non disponibles pour l’instant

Publications déposées sur HAL

Nombre de publications retournées : 302

Revues internationales avec comité de lecture

[1] A. Bernard, J. Delplace, N. Perry, S. Gabriel. Integration of CAD and rapid manufacturing for sand casting optimisation, in Rapid Prototyping Journal, vol. 9, no. 5, pp. 327 – 333, DOI

[2] N. Perry, M. Mauchand, A. Bernard. Modèles de coûts en fonderie sable : les limites d'une approche générique, in Revue Internationale de CFAO et d'informatique graphique, vol. 18, no. 3, pp. pp. 351-365,

[3] A. Bernard, N. Perry. Fundamental concepts of product / technology / process informational integration for process modeling and process planning, in International Journal of Computer Integrated Manufacturing, vol. 16, no. 7/8, pp. 557 – 565, DOI

[4] N. Perry, M. Mauchand, A. Bernard. Cost models for sand casting : the limits of a generic approach, in Advances in Integrated Design and Manufacturing in Mechanical Engineering, vol. 1, pp. 69-80, DOI

[5] N. Du Preez, N. Perry, A. Candlot, A. Bernard, W. Uys, L. Louw. Customised high-value document generation, in CIRP Annals – Manufacturing Technology, vol. 54, no. 1, pp. 123-126, DOI

[6] A. Candlot, N. Perry, A. Bernard, S. Ammar-Khodja. Deployment of an Innovative Resource Choice Method for Process Planning, in CIRP Journal of Manufacturing Systems, vol. 35, no. 5, pp. 487-506,

[7] W. Derigent, S. Remy, E. Chapotot, A. Bernard, G. Ris. 3D digitising strategy planning approach based on CAD model, in Journal of Computing and Information Science in Engineering, vol. 7, no. 1, pp. 10-19,

[8] A. Bernard, N. Perry, J. Delplace. Concurrent Cost Engineering for decisional and operational process enhancement in a foundry, in International Journal of Production Economics, vol. 109, no. 1-2, pp. 2-11, DOI

[9] A. Bernard, F. Laroche, S. Ammar-Khodja, N. Perry. Impact of New 3D Numerical Devices and Environments on Redesign and Valorisation of Mechanical Systems, in CIRP Annals – Manufacturing Technology, vol. 56, no. 1, pp. 143-148, DOI

[10] F. Laroche, A. Bernard, M. Cotte. Advanced Industrial Archaeology: A new reverse-engineering process for contextualizing and digitizing ancient technical objects, in Virtual and Physical Prototyping, vol. 3, no. Special Issue n°2, pp. pp.105-122,

[11] S. Ammar-Khodja, N. Perry, A. Bernard. Processing Knowledge to Support Knowledge-based Engineering Systems Specification, in Concurrent Engineering: Research and Applications, vol. 16, no. 1, pp. 89-101,

[12] S. Ammar-Khodja, N. Perry, A. Bernard. Processing Knowledge to Support Knowledge Based Engineering Systems Specification, in Concurrent Engineering: Research and Applications, vol. 16, no. 1, pp. 89-101, DOI

[13] M. Mauchand, A. Siadat, A. Bernard, N. Perry. Proposal for tool-based method of product cost estimation during conceptual design, in Journal of Engineering Design, vol. 19, no. 2, pp. 159-172, DOI

[14] M. Mauchand, N. Perry, A. Bernard. Specification management for the cost constraint optimisation in microelectronic design, in International Journal of Manufacturing Technology and Management, vol. 15, no. 3/4, pp. 284-297, DOI

[15] A. Bernard, Y. Xu. An integrated knowledge reference system for product development, in CIRP Annals – Manufacturing Technology, vol. 58, no. 1, pp. 119-122,

[16] F. Laroche, A. Bernard, M. Cotte. Une vision produit-process et sa méthodologie dédiée à la sauvegarde du patrimoine technique et industriel sous une forme virtuelle, in Revue MICADO Ingénierie Numérique Collaborative, pp. 26 pages,

[17] M. Shahrokhi, A. Bernard. A framework to develop an analysis agent for evaluating humen performance in manufacturing systems, in CIRP Journal of Manufacturing Systems and Technology, vol. 2, no. 1, pp. 55-60,

[18] Y. Xu, A. Bernard. Knowledge organization through statistical computation: A new approach, in Knowledge Organization, vol. 36, no. 4, pp. 227-239,

[19] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Global Approach for Technical Data Management Application to Ship Equipment Part Families, in CIRP Journal of Manufacturing Science and Technology, vol. 1, no. 3, pp. 185-190, DOI

[20] A. Bernard, N. Perry, P. Dépincé. Collaborative engineering as a basic concept for teaching structuring, in International Journal of Collaborative Engineering, vol. 1, no. 1/2, pp. 168 – 184, DOI

[21] A. Bernard, F. Laroche, S. Remy, A. Durupt. New trends in Reverse-Engineering: Augmented-Semantic models for redesign of existing objects, in Ouvrage collectif Reverse-Engineering, pp. 27 pages,

[22] M. Bosch-Mauchand, A. Siadat, N. Perry, A. Bernard. VCS: Value Chains Simulator, a Tool for Value Analysis of Manufacturing Enterprise Processes (A Value-Based Decision Support Tool), in Journal of Intelligent Manufacturing, pp. 700x-700x, DOI

[23] E. Mermoz, J. Linares, A. Bernard. Benefits and limitations of parametric design implementation in helicopter gearbox design phase, in CIRP Annals – Manufacturing Technology, vol. 60, no. 1, pp. 199 – 202, DOI

[24] J. Daaboul, C. da Cunha, A. Bernard, F. Laroche. Design for Mass Customization: Product variety vs. Process variety, in CIRP Annals – Manufacturing Technology, vol. 60, no. 1, pp. 169-174, DOI

[25] J. Munguía, A. Bernard, M. Erdal. Proposal and evaluation of a KBE- RM Selection System,, in Rapid Prototyping Journal, vol. 17, no. 4, pp. 236-246,

[26] K. Karunakaran, S. Ramachandra, A. Majila, U. Chandrasekhar, B. Shridhar, R. Jain, P. Vizhian, A. Bernard. Analysis of the bullet nose of an aero-engine for bird impact through virtual and rapid prototyping, in Virtual and Physical Prototyping, vol. 6, no. 2, pp. 121-130,

[27] M. Shahrokhi, A. Bernard, G. Fadel. An approach to optimise an avatar trajectory in a virtual workplac, in International Journal of Computer Integrated Manufacturing, vol. 24, no. 2, pp. 95-105, DOI

[28] S. Suryakumar, K. Karunakaran, A. Bernard, U. Chandrasekhar, N. Raghavender, D. Sharma. Weld bead modeling and process optimization in Hybrid Layered Manufacturing, in Computer-Aided Design, vol. 43, no. 4, pp. 331-344, DOI

[29] Y. Xu, A. Bernard. Quantifying the value of knowledge within the context of product development, in Knowledge-Based Systems, vol. 24, no. 1, pp. 166-175, DOI

[30] J. Daaboul, A. Bernard, F. Laroche. Extended value network modeling and simulation for mass customization implementation, in Journal of Intelligent Manufacturing, vol. 23, Issue 6, no. 6, pp. PP. 2427-2439, DOI: 10.1007/s10845-010-0493-1, DOI

[31] P. Rauffet, C. da Cunha, A. Bernard. Conceptual model and IT system for Organizational Capability management, in Computers in Industry, vol. 63, no. 7, pp. 706-722, DOI

[32] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Generic PLM system for SMEs: Application to an equipment manufacturer, in International Journal of Product Lifecycle Management, pp. http://www.inderscience.com/browse/index.php?journalID=139&year=2011&vol=5&issue=1, DOI

[33] N. Perry, A. Bernard, F. Laroche, S. Pompidou. Improving design for recycling – Application to composites, in CIRP Annals – Manufacturing Technology, vol. Volume 61, no. Issue 1, pp. 151-154, DOI

[34] L. Tapie, K. Mawussi, A. Bernard. Topological model for machining of parts with complex shapes, in Computers in Industry, vol. 63, no. Issue 5, pp. Pages 528-541,

[35] J. Le Duigou, A. Bernard, N. Perry. Framework for Product Lifecycle Management integration in Small and Medium Enterprises networks, in Computer-Aided Design and Applications, pp. http://www.cadanda.com/index.html,

[36] F. Laroche, F. Bordeu, A. Bernard, F. Chinesta. Towards the factory of future An integrated approach of material-processes-information-human being, in ACM – Proceedings of the 2012 Virtual Reality International Conference, pp. ISBN: 978-1-4503-1243-1 ; 6 pages, DOI

[37] E. Mermoz, J. Astoul, M. Sartor, J. Linares, A. Bernard. A new methodology to optimize spiral bevel gear topography, in CIRP Annals – Manufacturing Technology, vol. 62, pp. 119 – 122, DOI

[38] J. Xu, R. Houssin, A. Bernard, E. Caillaud. Systemic modelling of knowledge for innovation in design, in CIRP Journal of Manufacturing Science and Technology, vol. 6, pp. 1-12, DOI

[39] N. Perry, J. Wahl, C. Bois, A. Pilato, A. Bernard. Thick composite design for hydrogen vessels : a contribution to composite design method, in CIRP Annals – Manufacturing Technology, vol. 62, no. 1, pp. 139-142, DOI

[40] J. Astoul, E. Mermoz, M. Sartor, J. Linares, A. Bernard. New methodology to reduce the transmission error of the spiral bevel gears, in CIRP Annals – Manufacturing Technology, vol. 63, no. 1, pp. 165–168,

[41] J. Daaboul, J. Le Duigou, C. da Cunha, A. Bernard. Value networks: pulling the triggers. A combined approach of modelling and simulation for performance evaluation, in International Journal of Computer Integrated Manufacturing, vol. 27, no. 7, pp. 609-623, 10.1080/0951192X.2013.834478, DOI

[42] P. Rauffet, C. da Cunha, A. Bernard. A double-loop learning system for knowledge transfer and reuse in groups: application of a roadmapping approach, in International Journal of Knowledge and Learning, vol. 9, no. 1, pp. http://www.inderscience.com/info/inarticle.php?artid=67171, DOI

[43] P. Rauffet, C. da Cunha, A. Bernard. A dynamic methodology and associated tools to assess organizational capabilities, in Computers in Industry, vol. 65, no. 1, pp. 158-174, DOI

[44] J. Daaboul, P. Castagna, C. da Cunha, A. Bernard. Value network modelling and simulation for strategic analysis: A discrete event simulation approach, in International Journal of Production Research, DOI

[45] A. Bernard, R. Chenouard. Multi-physics Simulation for Product-service Performance Assessment, in Procedia CIRP, pp. 21 – 25, DOI

[46] Y. Xu, A. Bernard, N. Perry, J. Xu, S. Sugimoto. Knowledge evaluation in product lifecycle design and support, in Knowledge-Based Systems, vol. 70, pp. 256–267, DOI

[47] J. Daaboul, C. da Cunha, J. Le Duigou, B. Novak, A. Bernard. Differentiation and Customer decoupling points: An Integrated design approach for mass customization, in Concurrent Engineering: Research and Applications, vol. 23, no. 4, pp. 284-295, DOI

[48] K. Medini, C. da Cunha, A. Bernard. Tailoring performance evaluation to specific industrial contexts – application to sustainable mass customisation enterprises, in International Journal of Production Research, vol. 53, no. 8, pp. 2439-2456, DOI

[49] K. Medini, J. Le Duigou, C. da Cunha, A. Bernard. Investigating mass customization and sustainability compatibilities, in International Journal of Engineering Science and Technology, vol. 7, no. 1, pp. 11-20, DOI

[50] R. Harik, W. El Hachem, K. Medini, A. Bernard. Towards a holistic sustainability index for measuring sustainability of manufacturing companies, in International Journal of Production Research, pp. pp 1-23, DOI

[51] R. Harik, A. Nicolas, M. Dassouki, A. Bernard. Numerical analysis of geometrical and aerodynamic enhancements of a birdlike wing, in Engineering Computations, vol. 32, no. 1, pp. 86-101, DOI

[52] F. Laroche, A. Bernard, B. Hervy. DHRM: A new model for PLM dedicated to product design heritage, in CIRP Annals – Manufacturing Technology, vol. 64, no. 1, pp. 161-164, DOI

[53] M. Dhuieb, F. Belkadi, F. Laroche, A. Bernard. Conceptual framework for enhancing knowledge reuse in PLM environment with the concept of Digital Factory Assistant, in International Journal of Product Lifecycle Management, vol. 8, no. 4, pp. 330-347, DOI

[54] Y. Zhang, A. Bernard, J. Valenzuela, K. Karunakaran. Fast adaptive modeling method for build time estimation in Additive Manufacturing, in CIRP Journal of Manufacturing Science and Technology, vol. 10, pp. 49-60, DOI

[55] B. Hervy, F. Laroche, J. Kerouanton, A. Bernard, C. Courtin, B. Guillet, L. d'Haene, A. Waels. Museum augmented interface for historical scale models: towards a new way for cultural heritage promotion, in International Journal of Virtual Reality, vol. 15, no. 1, pp. 3-9,

[56] F. Belkadi, J. Buergin, R. Gupta, Y. Zhang, A. Bernard, G. Lanza, M. Colledani, M. Urgo. Co-Definition of Product Structure and Production Network for Frugal Innovation Perspectives: Towards a Modular-based Approach, in Procedia CIRP, vol. 50, pp. 589-594, DOI

[57] H. Shidpour, C. da Cunha, A. Bernard. Group multi-criteria design concept evaluation using combined rough set theory and fuzzy set theory, in Expert Systems with Applications, vol. 64, pp. 633-644, DOI

[58] M. Colledani, L. Silipo, A. Yemane, G. Lanza, J. Bürgin, J. Hochdörffer, K. Georgoulias, D. Mourtzis, F. Bitte, A. Bernard, F. Belkadi. Technology-based Product-services for Supporting Frugal Innovation, in Procedia CIRP, vol. 47, pp. 126-131, DOI

[59] M. Dhuieb, F. Laroche, A. Bernard. Context-awareness: A Key Enabler for Ubiquitous Access to Manufacturing Knowledge, in Procedia CIRP, vol. 41, pp. 484-489, DOI

[60] M. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja, F. Martina. Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, in CIRP Annals – Manufacturing Technology, vol. 65, no. 2, pp. 737-760, DOI

[61] P. Rauffet, C. Cunha, A. Bernard. Managing resource learning in distributed organisations with the organisational capability approach, in International Journal of Technology Management, vol. 70, no. 4, DOI

[62] Y. Zhang, W. Wang, A. Bernard. Embedding Multi-Attribute Decision Making into Evolutionary Optimization to Solve the Many-Objective Combinatorial Optimization Problems, in Grey System, vol. 28, no. 3, pp. 124-143,

[63] Y. Zhang, W. de Backer, R. Harik, A. Bernard. Build Orientation Determination for Multi-material Deposition Additive Manufacturing with Continuous Fibers, in Procedia CIRP, vol. 50, pp. 414-419, DOI

[64] Y. Zhang, A. Bernard, R. Gupta, R. Harik. Feature based building orientation optimization for additive manufacturing, in Rapid Prototyping Journal, vol. 22, no. 2, pp. 358-376, DOI

[65] Y. Zhang, R. Gupta, A. Bernard. Two-dimensional placement optimization for multi-parts production in additive manufacturing, in Robotics and Computer-Integrated Manufacturing, vol. 38, pp. 102-117, DOI

[66] G. Blondet, F. Belkadi, J. Le Duigou, A. Bernard, N. Boudaoud. Towards a knowledge based framework for numerical design of experiment optimization and management, in Computer-Aided Design and Applications, vol. 13, no. 6, pp. 872-884, DOI

[67] Y. Kulkarni, R. Gupta, A. Sahasrabudhe, M. Kale, A. Bernard. Leveraging feature information for defeaturing sheet metal feature-based CAD part model, in Computer-Aided Design and Applications, vol. 13, no. 6, pp. 885-898, DOI

[68] F. Laroche, M. Dhuieb, F. Belkadi, A. Bernard. Accessing enterprise knowledge: a context-based approach, in CIRP Annals – Manufacturing Technology, vol. 65, no. 1, pp. 189-192, DOI

[69] E. Maleki, F. Belkadi, M. Ritou, A. Bernard. A Tailored Ontology Supporting Sensor Implementation for the Maintenance of Industrial Machines, in Sensors, vol. 17, no. 9, pp. 2063, DOI

[70] F. Belkadi, Y. Zhang, L. Irazusta, E. Maleki, A. Bernard, S. Koukas. PSS Pattern Concept for Knowledge Representation in Design Process of Industrial Product-service Systems, in Procedia CIRP, vol. 60, pp. 428-433, DOI

[71] T. Tolio, A. Bernard, M. Colledani, S. Kara, G. Seliger, J. Duflou, O. Battaïa, S. Takata. Design, management and control of demanufacturing and remanufacturing systems, in CIRP Annals – Manufacturing Technology, vol. 66, no. 2, pp. 585-609, DOI

[72] M. Ouamer Ali, F. Belkadi, S. Remy, A. Bernard, F. Laroche. Facet-based approach for the management of information multi points-of- view in product modelling, in Computer-Aided Design and Applications, vol. 14, no. 5, pp. 15 p., DOI

[73] F. Belkadi, M. Messaadia, A. Bernard, D. Baudry. Collaboration management framework for OEM–suppliers relationships: a trust-based conceptual approach, in Enterprise Information Systems, DOI

[74] B. Hervy, F. Laroche, A. Bernard, J. Kerouanton. Framework for historical knowledge management in museology, in International Journal of Product Lifecycle Management, vol. 10, no. 1, pp. 44-68, DOI

[75] A. Chandrakar, F. Laroche, A. Bernard, Y. Zhang. Physical assembly sequence optimisation for developing an integrated 3D reconstruction method, in Virtual and Physical Prototyping, pp. pp.1-18, DOI

[76] Y. Zhang, A. Bernard, R. Harik, K. Karunakaran. Build orientation optimization for multi-part production in additive manufacturing, in Journal of Intelligent Manufacturing, vol. 28, no. 6, pp. 1393-1407, DOI

[77] F. Belkadi, M. Colledani, A. Bernard, M. Urgo, G. Colombo, G. Borzi, A. Ascheri. Modular design of production systems tailored to regional market requirements: A Frugal Innovation perspective, in IFAC-PapersOnLine, vol. 51, no. 11, pp. 96-101, DOI

[78] Y. Zhang, A. Bernard. A KBE CAPP framework for qualified additive manufacturing, in CIRP Annals – Manufacturing Technology, vol. 67, no. 1, pp. 467-470, DOI

[79] Z. Yahouni, N. Mebarki, F. Belkadi, A. Shahzad, A. Bernard. Human-machine cooperation in planning and scheduling: a case study on an unstable environment, in European Journal of Industrial Engineering, vol. 12, no. 6, pp. 757, DOI

[80] R. Gupta, F. Belkadi, C. Buergy, F. Bitte, C. da Cunha, J. Buergin, G. Lanza, A. Bernard. Gathering, evaluating and managing customer feedback during aircraft production, in Computers & Industrial Engineering, vol. 115, pp. 559 – 572, DOI

[81] J. Gao, A. Bernard. An overview of knowledge sharing in new product development, in International Journal of Advanced Manufacturing Technology, vol. 94, no. 5-8, pp. 1545-1550, DOI

[82] E. Maleki, F. Belkadi, N. Boli, B. van Der Zwaag, K. Alexopoulos, S. Koukas, M. Marin-Perianu, A. Bernard, D. Mourtzis. Ontology-based framework enabling smart Product-Service Systems: Application of sensing systems for machine health monitoring, in IEEE Internet of Things Journal, vol. Vol. 5, no. Issue 6, pp. 4496 – 4505, DOI

[83] J. Buergin, F. Belkadi, C. Hupays, R. Gupta, F. Bitte, G. Lanza, A. Bernard. A modular-based approach for Just-In-Time Specification of customer orders in the aircraft manufacturing industry, in CIRP Journal of Manufacturing Science and Technology, vol. 21, pp. 61-74, DOI

[84] Y. Zhang, A. Bernard, R. Harik, G. Fadel. A new method for single-layer-part nesting in additive manufacturing, in Rapid Prototyping Journal, vol. 24, no. 5, pp. 840-854, DOI

[85] C. Hartmann, R. Chenouard, E. Mermoz, A. Bernard. A framework for automatic architectural synthesis in conceptual design phase, in Journal of Engineering Design, pp. 1 – 25, DOI

[86] Y. Zhang, R. Harik, G. Fadel, A. Bernard. A statistical method for build orientation determination in additive manufacturing, in Rapid Prototyping Journal, DOI

[87] N. Lebaal, Y. Zhang, F. Demoly, S. Roth, S. Gomes, A. Bernard. Optimised lattice structure configuration for additive manufacturing, in CIRP Annals – Manufacturing Technology, vol. 68, no. 1, pp. 117-120, DOI

[88] F. Belkadi, J. Le Duigou, L. Dall’olio, G. Besombes, A. Bernard. Knowledge-based platform for traceability and simulation monitoring applied to design of experiments process: an open source architecture, in Journal of Engineering Design, pp. 1-25, DOI

[89] E. Sanfilippo, F. Belkadi, A. Bernard. Ontology-based knowledge representation for additive manufacturing, in Computers in Industry, vol. 109, pp. 182-194, DOI

[90] E. Maleki, F. Belkadi, E. Bonjour, A. Slayman, A. Bernard. Interface modeling for product‐service system integration, in Systems Engineering, vol. 22, no. 6, pp. 471-484, DOI

[91] F. Belkadi, M. Dhuieb, J. Aguado, F. Laroche, A. Bernard, F. Chinesta. Intelligent assistant system as a context-aware decision-making support for the workers of the future, in Computers & Industrial Engineering, vol. 139, pp. 105732, DOI

[92] L. Jeanson, F. Laroche, J. Kerouanton, A. Bernard. Knowledge management for modelled Heritage objects, requirement specification towards a tool for heterogeneity embracing, in International Journal on Interactive Design and Manufacturing, vol. 14, no. 4, pp. 1337-1345, DOI

[93] T. Vaneker, A. Bernard, G. Moroni, I. Gibson, Y. Zhang. Design for additive manufacturing: Framework and methodology, in CIRP Annals – Manufacturing Technology, vol. 69, no. 2, pp. 578-599, DOI

[94] Y. Zhang, Z. Wang, Y. Zhang, S. Gomes, A. Bernard. Bio-inspired generative design for support structure generation and optimization in Additive Manufacturing (AM), in CIRP Annals – Manufacturing Technology, vol. 69, no. 1, pp. 117-120, DOI

[95] K. Karunakaran, S. Negi, A. Nambolan, A. Patel, Y. Patil, M. Pandya, S. Kapil, D. Trushnikov, M. Sealy, A. Bernard. Challenges in path planning of high energy density beams for additive manufacturing, in IOP Conference Series: Materials Science and Engineering, vol. 759, pp. 012012, DOI

[96] F. Belkadi, N. Boli, L. Usatorre, E. Maleki, K. Alexopoulos, A. Bernard, D. Mourtzis. A knowledge-based collaborative platform for PSS design and production, in CIRP Journal of Manufacturing Science and Technology, vol. 29, no. Part B, pp. 220-231, DOI

[97] Z. Wang, Y. Zhang, S. Tan, L. Ding, A. Bernard. Support point determination for support structure design in additive manufacturing, in Additive Manufacturing, vol. 47, pp. 102341, DOI

[98] E. Maleki, M. Le Dain, L. Gzara, F. Belkadi, A. Bernard. Factors Influencing the Integration of Product and Service Design in Product-Service System Development, in Computer-Aided Design and Applications, vol. 19, no. 1, pp. 91-102, DOI

[99] Z. Wang, Y. Zhang, A. Bernard. Lightweight porous support structure design for additive manufacturing via knowledge-based bio-inspired volume generation and lattice configuration, in Virtual and Physical Prototyping, pp. 1-25, DOI

[100] Q. Jarrar, F. Belkadi, R. Blanc, K. Kestaneci, A. Bernard. Knowledge reuse for decision aid in additive manufacturing: application on cost quotation support, in International Journal of Production Research, pp. 1-21, DOI

[101] Z. Wang, Y. Zhang, D. Dai, D. Gu, C. Chen, D. Wang, A. Bernard. A Direct Toolpath Constructive Design Method for Controllable Porous Structure Configuration with a TSP-based Sequence Planning Determination, in Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, vol. 2, no. 1, pp. 100063, DOI

[102] M. Peron, F. Lolli, A. Bernard, M. Kay, M. Tiwari. Additive manufacturing for operations and supply chain management: from technological promise to supply chain integration, in International Journal of Production Research, vol. 64, no. 10, pp. 3707-3717, DOI

Revues nationales avec comité de lecture

[103] F. Laroche, S. Le Loch, M. Cotte, J. Kerouanton, A. Bernard. L'histoire, un medium de didactique aux Nouvelles Technologies, in Cahiers François Viète, pp. 6 pages,

Conférences internationales avec comité de lecture et actes

[104] A. Deglin, A. Bernard. A Knowledge-Based Environment for Modelling and Computer-Aided Process Planning of Rapid Manufacturing Processes, in Third IDMME Conference, Montréal, Canada, DOI

[105] S. Remy, W. Derigent, M. Véron, A. Bernard, G. Ris. Automatic 3D Digitizing: a visibility based approach, in 14th International CIRP Design Seminar 2004, Cairo, égypte,

[106] W. Derigent, S. Remy, A. Bernard, G. Ris. , in 2005 International CAD Conference and Exhibition (CAD’05), Bangkok, Thaïlande,

[107] F. Laroche, A. Bernard, M. Cotte. A new approach for preserving the technical heritage, in conférence VRIC – salon Laval Virtual, Laval, France,

[108] M. Shahrokhi, A. Bernard. An overview of theorethical bases of barrier modelling approaches, in 9th IFAC Symposium on Automated systems based on human skill and knowledge, Nancy, France,

[109] P. Rauffet, A. Bernard, C. da Cunha, N. Du Preez, L. Louw, W. Uys. Assessed, interactive and automated reification in a virtual community of practice, in International Symposium on Tools and Methods of Competitive Engineering, Turquie,

[110] J. Le Duigou, A. Bernard, S. Gabriel, J. Delplace. Approche globale pour la structuration et la gestion des données techniques du cycle de vie produit ; Application à une famille de poulies d'accastillage., in 7ème conférence internationale de modélisation et simulation, Paris, France,

[111] F. Laroche, A. Bernard, M. Cotte. Virtualization of ancient technical objects: a new design process and its inter-disciplinary team, in CIRP Design Seminar, Twente, Pays-Bas,

[112] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Global approach for product data management. Application to ship equipment part families., in Cirp MST, pp. CD, in Cirp Design Conference, Enschede, Pays-Bas,

[113] J. Daaboul, A. Bernard, F. Laroche. Knowledge Management, Value Chain Modelling and Simulation as Primary Tools for Mass Customization, in International Conference on Concurrent Enterprising, Leiben, Pays-Bas,

[114] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Inductive approach for the specification of a generic PLM system in an extended enterprise context., in 5th international conference on Digital Enterprise Technology, Nantes, France,

[115] Y. Xu, A. Bernard. Evaluation of knowledge value based on the knowledge maturity model, in 5th International Conference on Digital Enterprise Technology, France,

[116] A. Bernard, F. Laroche, C. da Cunha. Models and methods for knowledge formalisation in a PLM context, in 3rd International Congress Design and Modelling of Mechanical Systems CMSM'2009, Hammamet, Tunisie,

[117] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. A constraints driven Product Lifecycle Management framework., in 19th CIRP Design Conference, Cranfield, Royaume-Uni,

[118] P. Rauffet, C. da Cunha, A. Bernard. Designing and managing Organizational Interoperability with organizational capabilities and roadmaps, in 5th International Conference on Interoperability for Enteprise, Software and Appliccations (I-ESA), Beijin, Chine,

[119] V. Nhim, P. Rauffet, C. da Cunha, A. Bernard, W. Uys, L. Louw, N. Du Preez. Controlling ideas and concepts generation stage for a better management of innovation portfolio: analysis of the Fugle methodology's funnel, in International Conference on Industrial Engineering and Systems Management, Canada,

[120] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Specification of a generic PLM system dedicated to SMEs based on a PPRO meta-model., in 16th CIRP international conference on Lyfe Cycle Engineering, Le Caire, égypte,

[121] P. Rauffet, A. Bernard, C. da Cunha, M. Labrousse. Progress Management in Performance-Driven Systems: Study of the 5Steps Roadmapping, a Solution for Managing Organizational Capabilities and Their Learning Curves., in 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2009), Moscow, Russie,

[122] B. Chevallereau, A. Bernard, P. Mévellec. Améliorer les performances de l'industrie logicielle par une meilleure compréhension des besoins, in Conférence Internationale de Génie Industriel, Bagnères de Bigorre, France,

[123] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Approche inductive pour la spécification d'un système PLM générique., in 8ème Congrès International de Génie Industriel, Bagnères de Bigorre, France,

[124] P. Rauffet, C. da Cunha, A. Bernard. Le pilotage d'entreprise par les compétences organisationnelles : étude de la méthode 5 steps, in 8e Congrès International de Génie Industriel (CIGI), Tarbes, France,

[125] J. Daaboul, A. Bernard, F. Laroche. Knowledge Management, Value Chain Modeling and Simulation as Primary Tools for Mass Customization, in The 15th International Conference on Concurrent Enterprising (ICE), Pays-Bas,

[126] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. A function driven method for product lifecycle management., in 6th international conference on Product Lifecycle Management, Bath, Royaume-Uni,

[127] J. Daaboul, A. Bernard, F. Laroche. Implementing Mass Customization: Literature Review, in proceedings of the 5th World Conference on Mass Customization and Personalization, Helsinki, Finlande,

[128] F. Laroche, A. Bernard. How to inject ancient know-how for future design: using advanced industrial archaeology during pedagogical projects, in DPPI, Compiègne, France,

[129] Y. Xu, A. Bernard. Is knowledge value measurable? A basic survey, in The 3rd International Conference on Software, Knowledge, Information Management and Applications, Maroc,

[130] P. Rauffet, M. Labrousse, C. da Cunha, A. Bernard. Organizational learning in group: A digital double-loop system based on knowledge maturity and performance assessment, in 6th International Conference on Digital Enterprise Technology, R.A.S. chinoise de Hong Kong,

[131] J. Daaboul, A. Bernard, F. Laroche. EXTENDED VALUE CHAIN MODELLING AND SIMULATION FOR MASS CUSTOMIZATION IMPLEMENTATION, in the 6th International Conference on Digital Enterprise Technology, Hong Kong, R.A.S. chinoise de Hong Kong,

[132] B. Chevallereau, A. Bernard. How to build web self-services by functional profiles?, in New Technologies, Mobility and Security (NTMS), Cairo, égypte, DOI

[133] P. Rauffet, C. da Cunha, A. Bernard. Knowledge sharing and communities of practices for intra-organizational interoperability, in International Conference Interoperability for Enterprise Software and Applications, Royaume-Uni,

[134] J. Daaboul, A. Bernard, F. Laroche. Knowledge Management for Mass Customization, in The 20th International CIRP Design conference, NANTES, France,

[135] J. Daaboul, F. Laroche, A. Bernard. Determining the CODP Position by Value Network Modeling and Simulation, in The 16th International Conference on Concurrent Enterprising (ICE), Suisse,

[136] N. Jufer, J. Daaboul, J. Bathelt, D. Politze, F. Laroche, A. Bernard, A. Kunz. Performance Factory in the Context of Mass Customization, in ICE 2010 16th International Conference on Concurrent Enterprising (ICE), Suisse,

[137] J. Daaboul, A. Bernard, F. Laroche. PLM Requirements for Mass Customization, in The 7th International Conference on Product Lifecycle Management (PLM), Bremen, Allemagne,

[138] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Generic model for the implementation of PLM systems in mechanical SMEs, in 7th International Product Lifecycle Management Conference, Bremen, Allemagne,

[139] R. Chenouard, C. da Cunha, F. Laroche, A. Bernard. Model-based design of exploitation guidelines, in IDMME – Virtual Concept 2010, Bordeaux, France,

[140] J. Daaboul, C. da Cunha, F. Laroche, A. Bernard. Value of personalized products: modelling the customer perception, in The 2011 World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2011), San Francisco, états-Unis,

[141] Y. Xu, A. Bernard, N. Perry, L. Lian. Managing knowledge management tools: a systematic classification and comparison, in International Conference on Management and Service Science (MASS), Wuhan, China, France,

[142] J. Le Duigou, A. Bernard. Product Lifecycle Management Model for Design Information Management in Mechanical Field, in 21st CIRP Design Conference, Daejeon, Corée du Sud,

[143] N. Perry, A. Bernard, M. Bosch-Mauchand, J. Le Duigou, Y. Xu. Eco Global Evaluation: Cross Benefits of Economic and Ecological Evaluation, in 18th CIRP International 681 Conference on Life Cycle Engineering, Braunschweig, Allemagne, DOI

[144] A. Bernard, P. Rauffet, C. da Cunha. Organizational capability management for improving performance of global production networks, in 44th CIRP Conference on Manufacturing Systems, madison, états-Unis,

[145] K. Medini, C. da Cunha, A. Bernard. Enterprise Modelling Requirements for a Sustainability Multi Level Assessment, in The 21 st International Conference on Production Research, Stuttgart, Allemagne,

[146] Y. Xu, A. Bernard, N. Perry, L. Lian. Managing knowledge management tools: a systematic classification and comparison, in The 2011 International Conference on Management and Service Science (MASS), Chine,

[147] K. Medini, C. da Cunha, A. Bernard. Towards an Integrated Mass Customization and Sustainability Assessment Framework, in The 2011 World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2011), San Francisco, états-Unis,

[148] K. Medini, C. da Cunha, A. Bernard. Sustainable Mass Customized Enterprise: Key Concepts, Enablers and Assessment Techniques, in The 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucarest, Roumanie,

[149] J. Daaboul, P. Castagna, A. Bernard. From value chains to value networks : modeling and simulation, in 9th International Conference on Modeling, Optimization & SIMulation, Bordeaux, France,

[150] J. Matar, R. Chenouard, A. Bernard. SYNTHÈSE DES MÉTHODES INTERVALLES D'OPTIMISATION MULTIOBJECTIF EN CONCEPTION PRÉLIMINAIRE, in 9th International Conference on Modeling, Optimization & SIMulation (MOSIM 2012), Bordeaux, France,

[151] J. Matar, R. Chenouard, A. Bernard. SYNTHÈSE DES MÉTHODES INTERVALLES D'OPTIMISATION MULTIOBJECTIFS EN CONCEPTION PRÉLIMINAIRE, in 9th International Conference on Modeling, Optimization & SIMulation, Bordeaux, France,

[152] K. Medini, C. Da-Cunha, A. Bernard. An enterprise meta model for the assessment and improvement of sustainability and mass customization performance, in 9th International Conference on Modeling, Optimization & SIMulation, Bordeaux, France,

[153] N. Perry, A. Bernard, M. Bosch-Mauchand, J. Leduigou, Y. Xu. , in 9th International Conference on Modeling, Optimization & SIMulation, Bordeaux, France,

[154] B. Hervy, F. Laroche, J. Kerouanton, A. Bernard. Projet Nantes1900 : les nouvelles technologies au service de la capitalisation des connaissances et de la valorisation du patrimoine historique., in Colloque " Patrimoine et humanités numériques : quelles formations ? ", Paris, France,

[155] K. Medini, C. da Cunha, A. Bernard. A Method for Developing Sustainability and Mass Customization Indicators, in International Workshop on Green Supply Chain, Arras, France,

[156] B. Hervy, F. Laroche, A. Bernard. An information system for driving the future plm for museum: the DHRM, Digital Heritage Reference Model, in ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis – ESDA 2012, Nantes, France,

[157] F. Laroche, D. Lefevre, M. Servières, B. Hervy, A. Bernard. Intelligent Reverse-Engineering Segmentation: Automatic Semantic Recognition of Large 3D Digitalized Cloud of Points Dedicated to Heritage Objects, in ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, France, DOI

[158] J. Matar, R. Chenouard, A. Bernard. A New Integration Framework For Modeling And Optimizing Systems in Preliminary Design Phase, in ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes, France,

[159] K. Medini, C. da Cunha, A. Bernard. A Sustainability and Mass Customization Assessment Framework, in The ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, France,

[160] B. Hervy, F. Laroche, J. Kerouanton, A. Bernard. Advanced virtual reality visualisation systems based on a meta-model dedicated to historical knowledge., in 3rd IEEE International Conference on Cognitive Infocommunications (CogInfoCom 2012), Kosice, Slovaquie,

[161] H. Shidpour, A. Bernard, M. Shahrokhi. A group decision-making method based on intuitionistic fuzzy set in the three dimensional concurrent engineering environment: a multi-objective programming approach, in Forty Sixth CIRP Conferences on Manufacturing Systems 2013, Setubal, Portugal,

[162] K. Medini, C. da Cunha, A. Bernard. Méthodologie pour l'évaluation de la performance d'entreprises dans le contexte de personnalisation de masse durable, in 10ème Congrès International de Génie Industriel (CIGI 2013), France,

[163] B. Hervy, F. Laroche, A. Bernard, J. Kerouanton. Co-working for knowledge management in cultural heritage: towards a PLM for museum, in 10th Product Lifecycle Management for Society (PLM), Nantes, France, DOI

[164] M. Dhuieb, F. Laroche, A. Bernard. Digital Factory Assistant: Conceptual Framework and Research Propositions, in International Conference on Product Lifecycle Management, Nantes, France, DOI

[165] Y. Xu, J. Xu, A. Bernard. Knowledge Management in E-commerce Mass Customization, in 10th Product Lifecycle Management for Society (PLM), Nantes, France, DOI

[166] M. Dhuieb, F. Laroche, A. Bernard. Multi-scale structuring of enterprise's knowledge Towards an ubiquitous virtual assistant, in International Conference on Production and Integrated Design, Tlemcen, Algérie,

[167] M. Dhuieb, F. Laroche, A. Bernard. Toward a cognitive based approach for knowledge structuring, in 2013 IEEE 4th International Conference on Cognitive Infocommunications (CogInfoCom), Budapest, France,

[168] K. Medini, C. da Cunha, A. Bernard. Variety Steering Towards Sustainability: A Coupled Evaluation and Optimization Approach, in Advances in Production Management Systems-APMS, Ajaccio, France,

[169] M. Dhuieb, F. Belkadi, F. Laroche, A. Bernard. An Info*Engine based architecture to support interoperability with Windchill system, in 7th International Conference on Interoperability for Enterprises Sytems and Applications. Workshop Standardisation Developments for Enterprise Interoperability and the Manufacturing Service Domain, Albi, France,

[170] B. Hervy, F. Laroche, J. Kerouanton, A. Bernard, C. Courtin, L. d'Haene, B. Guillet, A. Waels. Augmented historical scale model for museums: from curation to multi-modal promotion, in Laval Virtual VRIC 14, Laval, France, DOI

[171] M. Ouamer Ali, F. Laroche, A. Bernard, S. Remy. Toward a methodological knowledge based approach for partial automation of reverse engineering, in CIRP Design conference, Milan, Italie,

[172] H. Shidpour, C. da Cunha, A. Bernard. Analyzing Single and Multiple Customer Order Decoupling Point Positioning based On Customer Value: A Multi-Objective approach, in CIRP conference on Manufacturing systems, Windsor, Canada,

[173] J. Daaboul, B. Novak, J. Le Duigou, C. da Cunha, A. Bernard. To mass customize or not to mass customize? The Alpina case, in International Conference on Integrated Design and Manufacturing in Mechanical Engineering – IDMME, Toulouse, France,

[174] M. Dhuieb, F. Belkadi, F. Laroche, A. Bernard. Interoperability Framework for Supporting Information-Based Assistance in the Factory, in 11th IFIP International Conference on Product Lifecycle Management (PLM), Yokohama, Japon, DOI

[175] R. Gupta, P. Sreenu, A. Bernard, F. Laroche. Process Information Model for Sheet Metal Operations, in 11th IFIP International Conference on Product Lifecycle Management (PLM), Yokohama, Japon, DOI

[176] B. Hervy, F. Laroche, B. Lam, V. Tourre, M. Servières, J. Kerouanton, A. Bernard. Historical Knowledge Management Through Virtual Reality: Theoretical Aspects and Experiment Proposal, in Digital Intelligence, Nantes, France,

[177] K. Medini, C. Cunha, A. Bernard. Variety Steering Towards Sustainability: A Coupled Evaluation and Optimization Approach, in IFIP International Conference on Advances in Production Management Systems (APMS), Ajaccio, France, DOI

[178] H. Shidpour, C. da Cunha, A. Bernard. A new design concept evaluation approach based on rough set and fuzzy AHP, in International conference on modeling, optimization and simulation – MOSIM, Nancy, France,

[179] K. Medini, C. da Cunha, A. Bernard, R. Chenouard. Enterprise modelling for performance measurement – gearing variety towards sustainability, in International conference on modeling, optimization and simulation – MOSIM, Nancy, France,

[180] M. Dhuieb, F. Belkadi, F. Laroche, A. Bernard. Thinking factory for the future: from PLM to augmented reality, in euroVR, Bremen, Allemagne,

[181] Y. Kulkarni, R. Gupta, A. Sahasrabudhe, M. Kale, A. Bernard. Defeaturing Sheet Metal Part Model based on Feature Information, in CAD'15, London, Royaume-Uni, DOI

[182] M. Ouamer Ali, F. Laroche, S. Remy, A. Bernard. Structuration de la connaissance dans le cadre de la rétro-conception de systèmes mécaniques, in Colloque de l'AIP PRIMECA – Avril 2015 – La Plagne, La Plagne, France,

[183] M. Dhuieb, F. Laroche, F. Belkadi, A. Bernard. Activity theory based context model: application for enterprise intelligent assistant systems, in 2015 IFAC Symposium on Information Control in Manufacturing, Ottawa, Canada,

[184] G. Blondet, F. Belkadi, J. Le Duigou, A. Bernard, N. Boudaoud. Simulation Data Management for Design of Experiment: Towards an open source platform, in Proceedings of CAD’15, London, Royaume-Uni,

[185] M. Dhuieb, F. Laroche, A. Bernard. Context-awareness: a key enabler for ubiquitous access to manufacturing knowledge, in 48th CIRP Conference on MANUFACTURING SYSTEMS – CIRP CMS 2015, Ischia, Italie,

[186] M. Dhuieb, F. Laroche, A. Bernard. Multi-scale knowledge structuring: Towards an ubiquitous assistant for the factory of the future, in Product and Asset Lifecycle Management, Belfort-Montbéliard, France,

[187] M. Dhuieb, F. Laroche, A. Bernard. Multi-scale knowledge structuring: Towards an ubiquitous assistant for the factory of the future, in Workshop PALM, Sochaux, France,

[188] Y. Bouallouche, C. Cunha, R. Chenouard, A. Bernard. Extended Administration: Public-Private Management, in IFIP International Conference on Advances in Production Management Systems (APMS), Tokyo, Japon, DOI

[189] M. Ouamer Ali, F. Laroche, S. Remy, A. Bernard. Knowledge and Information Structuring in Reverse Engineering of Mechanical Systems, in 12th IFIP International Conference on Product Lifecycle Management (PLM), Doha, Qatar, DOI

[190] Y. Zhang, R. Harik, A. Bernard, W. de Backer. A facet cluster-based method for alternative build orientation generation in additive manufacturing, in Solid Freeform Fabrication Symposium, Austin, Texas, états-Unis,

[191] F. Belkadi, R. Kumar Gupta, E. Vlachou, A. Bernard, D. Mourtis. Linking modular product structure to suppliers' selection through PLM approach: A Frugal innovation perspective, in 13th IFIP International Conference on Product Lifecycle Management,, Columbia, états-Unis,

[192] C. Hartmann, R. Chenouard, E. Mermoz, A. Bernard. Formulation of a design problem for computational pre-design, in Virtual Concept Workshop 2016, Bordeaux, France,

[193] F. Belkadi, E. Sanfilippo, A. Bernard, L. Vidal. Towards a Conceptual Modeling Framework for Additive Manufacturing Knowledge Representation, in CAD'19, singapore, Singapour, DOI

[194] M. Quantin, B. Hervy, F. Laroche, A. Bernard. Supervised Process of Un-structured Data Analysis for Knowledge Chaining, in CIRP design conference, Stockholm, Suède, DOI

[195] M. Ouamer Ali, F. Belkadi, F. Laroche, S. Remy, A. Bernard. Points of View Classification: A concept to Manage Knowledge Multi-representation in CAD Models and PDM/PLM Systems, in CAD conference, Vancouver, Canada, DOI

[196] R. Chenouard, C. Hartmann, A. Bernard, E. Mermoz. Computational Design Synthesis Using Model-Driven Engineering and Constraint Programming, in STAF 2016, Vienne, Autriche, DOI

[197] F. Belkadi, L. Dall’olio, G. Besombes, A. Bernard. SDM Framework as a Support for Decision-Making Traceability in Design of Experiments Process, in 13th IFIP International Conference on Product Lifecycle Management (PLM), Columbia, SC, états-Unis, DOI

[198] F. Belkadi, R. Gupta, E. Vlachou, A. Bernard, D. Mourtis. Linking Modular Product Structure to Suppliers’ Selection Through PLM Approach: A Frugal Innovation Perspective, in 13th IFIP International Conference on Product Lifecycle Management (PLM), Columbia, SC, états-Unis, DOI

[199] M. Lafleur, W. Terkaj, F. Belkadi, M. Urgo, A. Bernard, M. Colledani. An Onto-Based Interoperability Framework for the Connection of PLM and Production Capability Tools, in 13th IFIP International Conference on Product Lifecycle Management (PLM), Columbia, SC, états-Unis, DOI

[200] R. Gupta, F. Belkadi, A. Bernard. Evaluation and management of customer feedback to include market dynamics into product development: Satisfaction Importance Evaluation (SIE) model, in international conference on Engineering design (ICED), Vancouver, Canada,

[201] C. Hartmann, E. Mermoz, R. Chenouard, A. Bernard. A Conceptual Framework Leading to Different Dynamic Systems Architectures, in Forum 73 – Forth Worth, TX 2017, Fort Worth, états-Unis,

[202] E. Maleki, F. Belkadi, A. Bernard. Systems Engineering as a Foundation for PSS Development Project: Motivations and Perspectives, in 9th CIRP IPSS Conference : Circular Perspectives on PSS, Copenhagen, Danemark, DOI

[203] E. Maleki, F. Belkadi, A. Bernard. Model-Based Systems Engineering for PSS Development: Review and Problem Statement, in Doctorial workshop of the 20th World Congress of the International Federation of Automatic Control, IFAC, Toulouse, France,

[204] E. Maleki, F. Belkadi, B. Zwaag, A. Bernard. A sensor ontology enabling service implementation in Industrial Product-Service Systems, in FAC 2017 World Congress, Toulouse, France The 20th World Congress of the International Federation of Automatic Control, Toulouse, France, DOI

[205] F. Belkadi, R. Gupta, S. Natalizio, A. Bernard. Modular Architectures Management with PLM for the Adaptation of Frugal Products to Regional Markets, in 14th IFIP International Conference on Product Lifecycle Management (PLM), Seville, Espagne, DOI

[206] P. Elodie, B. Furet, S. Garnier, K. Subrin, A. Bernard. Additive manufacturing of foam for molds and large components in naval sector, in FAST 2017 – 14th Conference on fast sea transportation & innovative materials for maritime, Nantes, France,

[207] K. Medini, A. Moujahid, X. Boucher, A. Bernard. Product and Service Variety vs. Internal Performance – Towards New Balances, in The Mass Customization & Personalization Conference (MCPC’17), Aachen, Allemagne,

[208] K. Medini, A. Moujahid, X. Boucher, A. Bernard. Product and Service Variety Versus Internal Performance: Toward New Balances, in 9th World Mass Customization & Personalization Conference (MCPC 2017), Aachen, Allemagne, DOI

[209] E. Maleki, F. Belkadi, A. Bernard. A Meta-model for Product-Service System based on Systems Engineering approach, in 10th CIRP Conference on Industrial Product-Service Systems, IPSS 2018, Linköping, Suède, DOI

[210] E. Maleki, F. Belkadi, A. Bernard. Industrial Product-Service System modelling base on Systems Engineering, in 16th IFAC Symposium on Information Control Problems in Manufacturing, INCOM, Bergamo, Italie,

[211] E. Maleki, F. Belkadi, A. Bernard. Sensor ontology to support collaborative design of Industrial Product-Service System, in 15ème Colloque National AIP-Priméca, La Plagne, France,

[212] E. Maleki, M. Le Dain, L. Gzara, F. Belkadi, A. Bernard. Factors influencing the integration of product and service design in Product-Service System development, in CIRP 2019 – 29th CIRP Design Conference, Povoa de Varzim, Portugal,

[213] V. Frebet, F. Laroche, Y. Koch, A. Bernard, R. Kervadec. Interactive semantics-driven reconstruction methodology from Point Clouds, in 29th CIRP DESIGN 2019 OPEN DESIGN and DESIGN AS EXPONENTIAL TECHNOLOGY, Póvoa de Varzim, Portugal,

[214] E. Maleki, F. Belkadi, E. Bonjour, A. Bernard. Interfaces modeling for Product-Service System integration, in IEEE 2018 13th Annual Conference on System of Systems Engineering (SoSE), Paris, France, DOI

[215] E. Paquet, S. Le Loch, B. Furet, A. Bernard, S. Garnier. Numerical Simulation and Experimentation of Additive Manufacturing Processes with Polyurethane Foams, in The International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), Aix en Provence, France, DOI

[216] E. Paquet, B. Furet, S. Garnier, S. Le Loch, A. Bernard. Solutions de simulation numérique de l'impression 3d de matériaux expansifs pour la réalisation de pièces de très grandes dimensions, in NAFEMS FRANCE 2020, Paris, France,

[217] P. .S.A, F. Belkadi, C. da Cunha, A. Chriette, A. Bernard. A semantic interface model to support the integration of drones in a cyber-physical factory, in International conference on Interoperability for Enterprise Systems and Applications, Tarbes, France, DOI

[218] W. Zhiping, Y. Zhang, A. Bernard. A Novel Knowledge-Based Toolpath Constructive Approach for Designing High-Precision Graded Lattice Structure, in International Solid Freeform Fabrication Symposium, Austin, états-Unis,

[219] E. Leroy, A. Bernard, B. Furet, J. Hascoët, A. Le-Bail, A. Le Duigou, N. Leklou, P. Paillard, P. Weiss. The MAD4AM cluster: Toward a Multisectorial Accepted Development For Additive Manufacturing, in Assises Européennes de Fabrication Additive, Online, France,

[220] Q. Jarrar, A. Bernard, F. Belkadi. An Activity-Based Costing Model for Additive Manufacturing, in 18th IFIP International Conference on Product Lifecycle Management., Online Event,, Brésil, DOI

[221] M. Harrat, F. Belkadi, A. Bernard. A Methodology to Build a Framework for Collaboration Performance Assessment in PSS Delivery, in IFIP International Conference on Advances in Production Management Systems (APMS), Nantes, France, DOI

[222] M. Shahrokhi, A. Bernard. A Fuzzy Accident Risk Analysis Approach for a Concurrent Engineering Platform, in IFIP International Conference on Advances in Production Management Systems (APMS), Nantes, France, DOI

[223] M. Shahrokhi, Z. Sobhani, A. Bernard. Supplier Selection by Using the Goal Programming Approach, in IFIP International Conference on Advances in Production Management Systems (APMS), Nantes, France, DOI

[224] Q. Jarrar, F. Belkadi, A. Bernard. A Knowledge-Based Approach for Decision Support System in Additive Manufacturing, in IFIP International Conference on Advances in Production Management Systems (APMS), Nantes, France, DOI

Conférences nationales avec comité de lecture et actes

[225] F. Laroche, M. Cotte, J. Kerouanton, A. Bernard. L'image virtuelle comme source de connaissance pour le patrimoine technique et industriel : Comment allier Histoire et Ingénierie ?, in Congrès national des sociétés historiques et scientifiques, Arles, France,

[226] B. Chevallereau, A. Bernard. Durabilité des applications : contribution des nouvelles approches de modélisation, in CRIEC (Colloque de Recherche de l'Intergroupe des Ecoles Centrales), Nantes, France,

[227] B. Chevallereau, A. Bernard. Améliorer les performances de l'industrie logicielle par une meilleure compréhension des besoins, in Journées du GDR MACS-STP, Metz, France,

[228] B. Chevallereau, A. Bernard. Contribution des nouvelles approches de modélisation a la durabilité des applications, in Séminaire académique de l'AFIS, Nîmes, France,

[229] P. Rauffet, A. Bernard, C. da Cunha. Le pilotage d'entreprise par les capacités organisationnelles : étude de l'approche roadmapping, in Journées Nationales – Journées Doctorales MACS, Angers, France,

[230] B. Chevallereau, A. Bernard, P. Mévellec. Ingénierie dirigée par les modèles pendant la phase de spécification du besoin, in Ingénierie Dirigée par les Modèles, Nancy, France,

[231] J. Daaboul, Y. Xu, V. Vergara, J. Le Duigou, B. Chevallereau, P. Rauffet, F. Laroche, C. da Cunha, A. Bernard. Amélioration de la performance industrielle par l'ingénierie numérique, in 11ème Colloque National AIP-PRIMECA, France,

[232] B. Chevallereau, A. Bernard. Comment concevoir des télé procédures par des experts fonctionnels ?, in Journées du GDR MACS-STP, Annecy, France,

[233] F. Laroche, J. Kerouanton, M. Servières, A. Bernard. Un renouveau des pratiques muséographiques grâce au virtuel : un support à des applications pluridisciplinaires en pédagogie active, in Colloque National AIP-PRIMECA, Le Mont Dore, France,

[234] P. Rauffet, C. da Cunha, A. Bernard. Vers un apprentissage organisationnel durable dans le contexte de groupe d'entreprises : comparaison du progrès fonctionnel et de la performance opérationnelle, in Colloque National AIP PRIMECA, Mont Dore, France,

[235] F. Laroche, J. Kerouanton, M. Servières, A. Bernard. Un renouveau des pratiques muséographiques grâce au virtuel : un support à des applications pluridisciplinaire en pédagogie active, in 12ème colloque national AIP Primeca, Mont-Dore, France,

[236] J. Matar, R. Chenouard, A. Bernard. SYNTHÈSE DES MÉTHODES INTERVALLES POUR L'OPTIMISATION MULTIOBJECTIFS, in 13e congrès annuel de la Société française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF 2012), Angers, France,

[237] J. Daaboul, M. Bosch-Mauchand, C. da Cunha, A. Bernard. Configuration de processus industriels dans un contexte de produits customisés et multi-variés, in QUALITA2013, Compiègne, France,

[238] F. Laroche, B. Hervy, C. Courtin, J. Kerouanton, B. Guillet, A. Bernard. From heritage knowledge capitalization to cultural mediation thanks to augmented digital technologies. Experimentation at the Museum of Nantes History., in 15th International Conference and Exhibition on Virtual Reality & Converging Technologies, Laval, France,

[239] M. Dhuieb, F. Laroche, A. Bernard. Un compagnon virtuel d'aide à la décision : Une structuration multi-échelle de la connaissance in-extenso d'entreprise, in 21ème Congrès Français de Mécanique, Bordeaux, France,

[240] M. Dhuieb, F. Belkadi, A. Bernard, F. Laroche. Vers un système ubiquitaire d'aide à la décision in-vivo dédié au Manufacturing, in Systèmes Complexes d'Information et de Gestion des Risques pour l'Aide à la Décision, Brest, France,

[241] B. Hervy, M. Quantin, F. Laroche, A. Bernard, J. Kerouanton. Gestion de connaissances pour l'acquisition, le traitement et la valorisation des connaissances du patrimoine technique, in 26es Journées francophones d'Ingénierie des Connaissances, Rennes, France,

[242] T. Ngo, F. Belkadi, A. Bernard. Interest of PLM for data sharing in the patient treatment process requiring prosthesis implantation, in Colloque national AIP-Primeca, La plagne, France,

[243] A. Chandrakar, F. Laroche, Y. Zhang, A. Bernard. Development of an Integrated Method for Reassembly Fragmented, in 15ème colloque national AIP Primeca, la plagne, France,

[244] M. Ouamer Ali, F. Laroche, S. Remy, A. Bernard. Ki4D : Nouvelle méthodologie de rétro- conception intégrée, in 15ème colloque national AIP Primeca, La Plagne, France,

Ouvrages – Chapitres d'ouvrages et directions d'ouvrages

[245] N. Perry, A. Bernard. Cost objective PLM and CE,

[246] A. Bernard, N. Perry, J. Delplace, S. Gabriel. QUOTATION FOR THE VALUE ADDED ASSESSMENT DURING PRODUCT DEVELOPMENT AND PRODUCTION PROCESSES,

[247] M. Labrousse, N. Perry, A. Bernard. Modèle FBS-PPR : des objets d'entreprise à la gestion dynamique des connaissances industrielles,

[248] N. Perry, M. Mauchand, A. Bernard. COSTS MODELS IN DESIGN AND MANUFACTURING OF SAND CASTING PRODUCTS,

[249] M. Shahrokhi, M. Pouliquen, A. Bernard. ,

[250] N. Perry, M. Mauchand, A. Bernard. Integration of Cost Models in Design and Manufacturing,

[251] A. Bernard, S. Ammar-Khodja, A. Candlot, N. Perry. Knowledge Engineering Systems For Digital Enterprise Performance Improvement,

[252] F. Laroche, A. Bernard, M. Cotte. Knowledge management for industrial heritage,

[253] S. Ammar-Khodja, A. Bernard, N. Perry. Software Engineering and Knowledge Engineering: From Competition to Cooperation,

[254] A. Bernard, S. Tichkiewitch. Methods and Tools for Effective Knowledge Life-Cycle-Management, DOI

[255] P. Rauffet, C. da Cunha, A. Bernard. Knowledge Sharing and Communities of Practices for Intra-organizational Interoperability,

[256] P. Rauffet, M. Labrousse, C. da Cunha, A. Bernard. Sustainable Organizational Learning in Group: A Digital Double-Loop System Based on Knowledge Maturity and Performance Assessment,

[257] A. Bernard, J. Daaboul, F. Laroche, C. da Cunha. Mass Customisation as a Competitive Factor for Sustainability,

[258] A. Bernard, O. Gusikhin, K. Madani. Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2011, Noordwijkerhout, The Netherlands, 28 – 31 July, 2011 Revised Selected Papers,

[259] J. Daaboul, A. Bernard, F. Laroche. Knowledge Management for Mass Customisation, DOI

[260] J. Ferrier, A. Bernard, O. Gusikhin, K. Madani. Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2011, Volume 2, Noordwijkerhout, The Netherlands, 28 – 31 July, 2011,

[261] J. Ferrier, A. Bernard, O. Gusikhin, K. Madani. Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2012, Volume 1, Noordwijkerhout, The Netherlands, 28 – 31 July, 2011,

[262] N. Perry, A. Bernard, M. Bosch-Mauchand, J. Le Duigou, Y. Xu. , DOI

[263] J. Le Duigou, A. Bernard, N. Perry, J. Delplace. Application of PLM processes to respond to mechanical SMEs needs, DOI

[264] F. Laroche, J. Kerouanton, A. Bernard. A case study of capitalisation and valorisation of our technical heritage, DOI

[265] J. Ferrier, A. Bernard, O. Gusikhin, K. Madani. Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2012, Volume 1, Rome, Italy, 28 – 31 July, 2012,

[266] J. Ferrier, A. Bernard, O. Gusikhin, K. Madani. Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2012, Volume 2, Rome, Italy, 28 – 31 July, 2012,

[267] A. Bernard, L. Rivest, D. Dutta. Product Lifecycle Management for Society, DOI

[268] Y. Xu, A. Bernard, N. Perry, F. Laroche. Improvement of product design process by knowledge value analysis, DOI

[269] N. Perry, A. Bernard, M. Bosch-Mauchand, J. Le Duigou, Y. Xu-. Proposal for an Architectural Solution for Economic and Environmental Global Eco-Cost Assessment: Model Combination Analysis, DOI

[270] S. Fukuda, A. Bernard, B. Gurumoorthy, A. Bouras. Product Lifecycle Management for a Global Market, DOI

[271] C. Barlier, A. Bernard. Fabrication additive : du prototypage rapide à l'impression 3D,

[272] A. Bernard, F. Laroche, B. Hervy. Le document comme outil de préservation,

[273] R. Harik, L. Rivest, A. Bernard, B. Eynard, A. Bouras. Product Lifecycle Management for Digital Transformation of Industries, DOI

[274] E. Maleki, F. Belkadi, Y. Zhang, A. Bernard. Towards a new collaborative framework supporting the design process of industrial Product Service Systems,

[275] Y. Bouallouche, R. Chenouard, C. da Cunha, A. Bernard. Organizational Interoperability Between Public and Private Actors in an Extended Administration, DOI

[276] R. Gupta, Y. Zhang, A. Bernard, B. Gurumoorthy. Generic Classification and Representation of Shape Features in Sheet-Metal Parts, DOI

[277] T. Ngo, F. Belkadi, A. Bernard. Applying PLM approach for supporting collaborations in medical sector: case of prosthesis implantation,

[278] E. Sanfilippo, L. Jeanson, F. Belkadi, F. Laroche, A. Bernard. A Foundational View on Nominal and Actual Qualities in Engineering, DOI

[279] C. Fortin, L. Rivest, A. Bernard, A. Bouras. Product Lifecycle Management in the Digital Twin Era, DOI

[280] E. Pei, M. Monzón, A. Bernard. Additive Manufacturing – Developments in Training and Education, DOI

[281] A. Bernard, M. Thompson, G. Moroni, T. Vaneker, E. Pei, C. Barlier. Functional, Technical and Economical Requirements Integration for Additive Manufacturing Design Education, DOI

[282] E. Pei, A. Bernard, D. Gu, C. Klahn, M. Monzón, M. Petersen, T. Sun. Springer Handbook of Additive Manufacturing, DOI

[283] M. Shahrokhi, M. Vaziri Sarashk, A. Bernard. Risk Analysis, a Fuzzy Analytic Approach, DOI

[284] A. Bernard, C. Klahn, M. Biedermann. Additive Manufacturing Applications and Case Study Examples, DOI

[285] E. Pei, M. Monzón, A. Bernard, I. Gibson. Additive Manufacturing Teaching and Training Case Studies, DOI

Autres publications

[286] P. Rauffet, C. da Cunha, A. Bernard. Integration de la conduite du progres dans le pilotage de la performance: developpement des capacites organisationnelles par l'apprentissage,

[287] P. Rauffet, C. da Cunha, A. Bernard. Pilotage de la performance organisationnelle: D'un modèle intuitif a un modele inductif des capacités organisationnelles,

[288] P. Rauffet, C. da Cunha, A. Bernard. L'apprentissage organisationnel : cadre de gestion, outils d'évaluation et d'amélioration,

[289] B. Chevallereau, A. Bernard. Améliorer les performances de l'industrie logicielle par une meilleure compréhension des besoins,

[290] B. Chevallereau, R. Chenouard, A. Bernard. Model Driven Requirements Engineering (MDRE): MDE in the first step of the model driven development process,

[291] P. Rauffet, C. da Cunha, A. Bernard. IT-based modeling for organizational capability management,

[292] P. Rauffet, C. da Cunha, A. Bernard. Organizational capabilities assessment: a dynamic methodology, methods and a tool for supporting organizational diagnosis,

[293] P. Rauffet, C. da Cunha, A. Bernard. Part I – Improving performance of extended organizations with organizational capability approach: Overview, challenges and proposition for a management framework,

[294] M. Aurousseau, E. Ballot, A. Bernard, D. Brissaud, S. Caroly, Y. Frein, B. Grabot, V. Rocchi. FUTURPROD – Les systèmes de production du futur,

[295] J. Ríos, A. Bernard, A. Bouras, S. Foufou. Product Lifecycle Management and the Industry of the Future, in IFIP Advances in Information and Communication Technology, vol. AICT-517, DOI

[296] P. .S.A, C. da Cunha, F. Belkadi, A. Bernard, A. Chriette. Model-based system engineering approach for the conception of flexible production systems, in Systems Engineering: Product, Process, Performance (Equipe IS3P) Réunion-LS2N, Nantes, France,

[297] A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, D. Romero. Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems, DOI

[298] A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, D. Romero. Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems., in IFIP Advances in Information and Communication Technology, vol. AICT-633, DOI

[299] A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, D. Romero. Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems. Part I, in IFIP Advances in Information and Communication Technology, vol. AICT-630, in IFIP WG 5.7 International Conference, APMS 2021 Nantes, France, September 5–9, 2021 Proceedings, Part I, Nantes, France, DOI

[300] A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, D. Romero. Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems. Part II, in IFIP Advances in Information and Communication Technology, vol. AICT-631, no. Part II, in IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5–9, 2021, Proceedings, Part II, Nantes, France, DOI

[301] A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, D. Romero. Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems. Part III, DOI

[302] A. Bernard, A. Dolgui, H. Haddou Benderbal, D. Ivanov, D. Lemoine, F. Sgarbossa. 10th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2022, Nantes, France, 22-24 June 2022,

Pas de projets référencées pour l’instant

Pas de plateformes référencées pour l’instant

Pas de logiciels de référencés pour l’instant