Membre

Fiche Membre

En un clic !

Thématiques de recherche
Pôles d’expertises
Nos équipes
Formation par la recherche
- Doctorats
- Masters
HDR
Thèses
Publications

Composante(s) d’expertise Pôle associée(s)

CCS

Automatisation des processusGénie industrielGestion de production

Expertises équipes

Ingénierie numérique appliquée aux systèmes industrielsIntelligence artificielle et optimisation pour les systèmes de productionPilotage, supervision et surveillance des systèmes industrielsSystèmes industriels cyber-physiques et industrie intelligente

Catherine Da Cunha

HDR

Enseignant chercheur / Enseignante chercheuse – Professeur / professeure des universités

Equipe : CPS3

Employeur : Centrale Nantes

Expertises :

CustomizationFlexible and Reconfigurable Manufacturing systemsAnalyse du cycle de vie (ACV)Empreinte carbone produit

Coordonnées

Email :

Adresse(s)

Informations non disponibles pour l’instant

Publications déposées sur HAL

Nombre de publications retournées : 130

Revues internationales avec comité de lecture

[1] C. da Cunha, B. Agard, A. Kusiak. Data mining for improvement of product quality., in International Journal of Production Research, vol. 44, no. 18/19, pp. 4027-4041, DOI

[2] C. da Cunha, B. Agard, A. Kusiak. (18th ICPR) Data mining for improvement of product quality, in International Journal of Production Research, vol. 44, no. 18-19, pp. 4027-4041, DOI

[3] C. da Cunha, B. Agard, A. Kusiak. Design for Cost: Module-Based Mass Customization, in IEEE Transactions on Automation Science and Engineering, vol. 4, no. 3, pp. 350 – 359, DOI

[4] C. da Cunha, Y. Frein. Heuristics for determining module stocks in assemble-to-order systems, in Journal of Decision Systems, vol. 17, no. 3, pp. 403-424,

[5] B. Agard, C. da Cunha, B. Cheung. Composition of module stock for final assembly using an enhanced genetic algorithm, in International Journal of Production Research, vol. 47, no. 20, pp. 5829-584, DOI

[6] C. da Cunha, B. Agard, A. Kusiak. Selection of modules for mass customization, in International Journal of Production Research, vol. 48, no. 5, pp. pp. 1439-1454, DOI 10.1080/00207540802473989, DOI

[7] J. Daaboul, C. da Cunha, A. Bernard, F. Laroche. Design for Mass Customization: Product variety vs. Process variety, in CIRP Annals – Manufacturing Technology, vol. 60, no. 1, pp. 169-174, DOI

[8] P. Rauffet, C. da Cunha, A. Bernard. Conceptual model and IT system for Organizational Capability management, in Computers in Industry, vol. 63, no. 7, pp. 706-722, DOI

[9] J. Daaboul, J. Le Duigou, C. da Cunha, A. Bernard. Value networks: pulling the triggers. A combined approach of modelling and simulation for performance evaluation, in International Journal of Computer Integrated Manufacturing, vol. 27, no. 7, pp. 609-623, 10.1080/0951192X.2013.834478, DOI

[10] P. Rauffet, C. da Cunha, A. Bernard. A double-loop learning system for knowledge transfer and reuse in groups: application of a roadmapping approach, in International Journal of Knowledge and Learning, vol. 9, no. 1, pp. http://www.inderscience.com/info/inarticle.php?artid=67171, DOI

[11] P. Rauffet, C. da Cunha, A. Bernard. A dynamic methodology and associated tools to assess organizational capabilities, in Computers in Industry, vol. 65, no. 1, pp. 158-174, DOI

[12] J. Daaboul, P. Castagna, C. da Cunha, A. Bernard. Value network modelling and simulation for strategic analysis: A discrete event simulation approach, in International Journal of Production Research, DOI

[13] J. Daaboul, C. da Cunha, J. Le Duigou, B. Novak, A. Bernard. Differentiation and Customer decoupling points: An Integrated design approach for mass customization, in Concurrent Engineering: Research and Applications, vol. 23, no. 4, pp. 284-295, DOI

[14] K. Medini, C. da Cunha, A. Bernard. Tailoring performance evaluation to specific industrial contexts – application to sustainable mass customisation enterprises, in International Journal of Production Research, vol. 53, no. 8, pp. 2439-2456, DOI

[15] K. Medini, J. Le Duigou, C. da Cunha, A. Bernard. Investigating mass customization and sustainability compatibilities, in International Journal of Engineering Science and Technology, vol. 7, no. 1, pp. 11-20, DOI

[16] H. Shidpour, C. da Cunha, A. Bernard. Group multi-criteria design concept evaluation using combined rough set theory and fuzzy set theory, in Expert Systems with Applications, vol. 64, pp. 633-644, DOI

[17] P. Rauffet, C. Cunha, A. Bernard. Managing resource learning in distributed organisations with the organisational capability approach, in International Journal of Technology Management, vol. 70, no. 4, DOI

[18] C. da Cunha. Supply chain management for engineers, in Production Planning and Control, vol. 27, no. 10, pp. 864 – 864, DOI

[19] L. Rodriguez Pelliere, C. da Cunha. Impacts of big data analytics and absorptive capacity on sustainable supply chain innovation: a conceptual framework, in LogForum, vol. 14, pp. 151 – 161, DOI

[20] R. Gupta, F. Belkadi, C. Buergy, F. Bitte, C. da Cunha, J. Buergin, G. Lanza, A. Bernard. Gathering, evaluating and managing customer feedback during aircraft production, in Computers & Industrial Engineering, vol. 115, pp. 559 – 572, DOI

[21] E. Poirson, C. Cunha. A recommender approach based on customer emotions, in Expert Systems with Applications, vol. 122, pp. 281-288, DOI

[22] Z. Wang, C. da Cunha, M. Ritou, B. Furet. Comparison of K-means and GMM methods for contextual clustering in HSM, in Procedia Manufacturing, vol. 28, pp. 154-159, DOI

[23] M. Ritou, F. Belkadi, Z. Yahouni, C. da Cunha, F. Laroche, B. Furet. Knowledge-based multi-level aggregation for decision aid in the machining industry, in CIRP Annals – Manufacturing Technology, vol. 68, no. 1, pp. 475-478, DOI

[24] Z. Wang, M. Ritou, C. da Cunha, B. Furet. Contextual classification for smart machining based on unsupervised machine learning by Gaussian mixture model, in International Journal of Computer Integrated Manufacturing, vol. 33, no. 10-11, pp. 1042-1054, DOI

[25] A. Ladj, Z. Wang, O. Meski, F. Belkadi, M. Ritou, C. da Cunha. A knowledge-based Digital Shadow for machining industry in a Digital Twin perspective, in Journal of Manufacturing Systems, vol. 58, pp. 168-179, DOI

[26] P. .S.A, C. da Cunha. Smart Factory: From concepts to operational sustainable outcomes using test-beds, in Log forum- Scientific journal of logistics, vol. 1, pp. 7-23, DOI

[27] P. Sa, C. da Cunha. A Semantic Model Framework for the Cyber‐Physical Production System in the Systems Engineering Perspective, in Africa Insight, vol. 24, no. 4, pp. 16-17, DOI

[28] B. Goss, C. da Cunha, J. Leendertse, A. Senra, A. Horta-Bellido. How universities shape entrepreunarial ecosystems: examples from across Europe, in Economia Industrial, vol. 435, pp. 81-98,

[29] L. Wang, R. Abbou, C. da Cunha. Multi-stage scheduling for sustainable manufacturing: balancing demand, resources, and social responsibility, in International Journal of Dynamics and Control, vol. 13, pp. 187, DOI

[30] S. Tamak, Y. Eslami, C. Cunha. Validation of multidimensional performance assessment models using hierarchical clustering, in Expert Systems with Applications, vol. 290, pp. 128446, DOI

[31] S. Tamak, Y. Eslami, N. Leutwyler, C. da Cunha. Exploring the Relationships between Formalisation and Validation Tools in Sustainability Assessment Models: Insights from Formal Concept Analysis, in Journal of Industrial Information Integration, vol. 48, pp. 100999, DOI

[32] A. Gupta, A. Maden, C. Plouze, P. Feraud, C. da Cunha, M. Rauch, H. Sapardanis. Mechanical Analysis of Thick-Walled Low-Carbon Steel Structures Produced by Wire Arc Additive Manufacturing with Zig-Zag Trajectories, in Journal of Machine Engineering, vol. 26, pp. 5-24, DOI

[33] F. Abdoune, M. Nouiri, Y. Eslami, C. da Cunha, O. Cardin. Foundations for Sustainable Digital Twins: Requirements and Research Insights, in Annual Reviews in Control, vol. 62, pp. 101068, DOI

Conférences internationales avec comité de lecture et actes

[34] C. da Cunha, Y. Frein. Heuristiques pour la composition d'un stock de produis semi-finis, in Conférence de MOdélisation et SIMulation, Nantes, France,

[35] C. da Cunha, B. Agard. Influence de la nature de la demande sur la constitution d'un stock de produits semi-finis, in Congrès international de génie industriel, Besançon, France,

[36] P. Maropoulos, M. Chauve, C. da Cunha. Review of Trends in Logistic Networks and Supply Chain Evaluation, in International Conference on Dynamics in Logistics – LDIC 2007, Allemagne,

[37] P. Rauffet, A. Bernard, C. da Cunha, N. Du Preez, L. Louw, W. Uys. Assessed, interactive and automated reification in a virtual community of practice, in International Symposium on Tools and Methods of Competitive Engineering, Turquie,

[38] A. Bernard, F. Laroche, C. da Cunha. Models and methods for knowledge formalisation in a PLM context, in 3rd International Congress Design and Modelling of Mechanical Systems CMSM'2009, Hammamet, Tunisie,

[39] P. Rauffet, C. da Cunha, A. Bernard. Designing and managing Organizational Interoperability with organizational capabilities and roadmaps, in 5th International Conference on Interoperability for Enteprise, Software and Appliccations (I-ESA), Beijin, Chine,

[40] V. Nhim, P. Rauffet, C. da Cunha, A. Bernard, W. Uys, L. Louw, N. Du Preez. Controlling ideas and concepts generation stage for a better management of innovation portfolio: analysis of the Fugle methodology's funnel, in International Conference on Industrial Engineering and Systems Management, Canada,

[41] J. Aranbarri Artetxe, C. da Cunha, V. Vergara, P. Rauffet. , in 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2009), Moscow, Russie,

[42] P. Rauffet, A. Bernard, C. da Cunha, M. Labrousse. Progress Management in Performance-Driven Systems: Study of the 5Steps Roadmapping, a Solution for Managing Organizational Capabilities and Their Learning Curves., in 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2009), Moscow, Russie,

[43] P. Rauffet, C. da Cunha, A. Bernard. Le pilotage d'entreprise par les compétences organisationnelles : étude de la méthode 5 steps, in 8e Congrès International de Génie Industriel (CIGI), Tarbes, France,

[44] P. Rauffet, M. Labrousse, C. da Cunha, A. Bernard. Organizational learning in group: A digital double-loop system based on knowledge maturity and performance assessment, in 6th International Conference on Digital Enterprise Technology, R.A.S. chinoise de Hong Kong,

[45] P. Rauffet, C. da Cunha, A. Bernard. Knowledge sharing and communities of practices for intra-organizational interoperability, in International Conference Interoperability for Enterprise Software and Applications, Royaume-Uni,

[46] R. Chenouard, C. da Cunha, F. Laroche, A. Bernard. Model-based design of exploitation guidelines, in IDMME – Virtual Concept 2010, Bordeaux, France,

[47] J. Daaboul, C. da Cunha, F. Laroche, A. Bernard. Value of personalized products: modelling the customer perception, in The 2011 World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2011), San Francisco, états-Unis,

[48] I. Jomaa, C. da Cunha, E. Poirson, J. Petiot. PREFERENCE BASED SYSTEM: AN ASSISTANCE FOR CHOOSING A COMIC, in AipPrimeca, Mont Dore, France,

[49] A. Bernard, P. Rauffet, C. da Cunha. Organizational capability management for improving performance of global production networks, in 44th CIRP Conference on Manufacturing Systems, madison, états-Unis,

[50] K. Medini, C. da Cunha, A. Bernard. Enterprise Modelling Requirements for a Sustainability Multi Level Assessment, in The 21 st International Conference on Production Research, Stuttgart, Allemagne,

[51] I. Jomaa, E. Poirson, C. da Cunha, J. Petiot. A METHODOLOGY FOR DESIGNING A RECOMMENDER SYSTEM BASED ON CUSTOMER PREFERENCES, in ICED 2011 Conference, COPENHAGUE, Danemark,

[52] K. Medini, C. da Cunha, A. Bernard. Towards an Integrated Mass Customization and Sustainability Assessment Framework, in The 2011 World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2011), San Francisco, états-Unis,

[53] I. Jomaa, E. Poirson, C. da Cunha, J. Petiot. Design of a recommender system based on customer preferences: a comparison between two approaches, in ASME 11th Biennial Conference on Engineering Systems Design and Analysis – ESDA 2012, Nantes, France, DOI

[54] K. Medini, C. da Cunha, A. Bernard. Sustainable Mass Customized Enterprise: Key Concepts, Enablers and Assessment Techniques, in The 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucarest, Roumanie,

[55] K. Medini, C. Da-Cunha, A. Bernard. An enterprise meta model for the assessment and improvement of sustainability and mass customization performance, in 9th International Conference on Modeling, Optimization & SIMulation, Bordeaux, France,

[56] K. Medini, C. da Cunha, A. Bernard. A Method for Developing Sustainability and Mass Customization Indicators, in International Workshop on Green Supply Chain, Arras, France,

[57] K. Medini, C. da Cunha, A. Bernard. A Sustainability and Mass Customization Assessment Framework, in The ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, France,

[58] K. Medini, C. da Cunha, A. Bernard. Méthodologie pour l'évaluation de la performance d'entreprises dans le contexte de personnalisation de masse durable, in 10ème Congrès International de Génie Industriel (CIGI 2013), France,

[59] A. Chadeneau, E. Dol, S. Martinez, C. da Cunha. Evaluation of Sustainable Mass Customized Habitation: The Case of CAP 44, in Advances in Production Management Systems-APMS, Ajaccio, France,

[60] E. Poirson, C. da Cunha, J. Petiot. Can we categorize moviegoers on their emotions?, in Kanseï engineering and emotion research – KEER, Linkoping, Suède,

[61] K. Medini, C. da Cunha, A. Bernard. Variety Steering Towards Sustainability: A Coupled Evaluation and Optimization Approach, in Advances in Production Management Systems-APMS, Ajaccio, France,

[62] H. Shidpour, C. da Cunha, A. Bernard. Analyzing Single and Multiple Customer Order Decoupling Point Positioning based On Customer Value: A Multi-Objective approach, in CIRP conference on Manufacturing systems, Windsor, Canada,

[63] J. Daaboul, B. Novak, J. Le Duigou, C. da Cunha, A. Bernard. To mass customize or not to mass customize? The Alpina case, in International Conference on Integrated Design and Manufacturing in Mechanical Engineering – IDMME, Toulouse, France,

[64] A. Chadeneau, E. Dol, S. Martinez, C. Cunha. Evaluation of Sustainable Mass Customized Habitation: The Case of CAP 44, in IFIP International Conference on Advances in Production Management Systems (APMS), Ajaccio, France, DOI

[65] J. Daaboul, C. Cunha. Differentiation and Customer Decoupling Points: Key Value Enablers for Mass Customization, in IFIP International Conference on Advances in Production Management Systems (APMS), Ajaccio, France, DOI

[66] K. Medini, C. Cunha, A. Bernard. Variety Steering Towards Sustainability: A Coupled Evaluation and Optimization Approach, in IFIP International Conference on Advances in Production Management Systems (APMS), Ajaccio, France, DOI

[67] H. Shidpour, C. da Cunha, A. Bernard. A new design concept evaluation approach based on rough set and fuzzy AHP, in International conference on modeling, optimization and simulation – MOSIM, Nancy, France,

[68] K. Medini, C. da Cunha, A. Bernard, R. Chenouard. Enterprise modelling for performance measurement – gearing variety towards sustainability, in International conference on modeling, optimization and simulation – MOSIM, Nancy, France,

[69] Y. Bouallouche, C. Cunha, R. Chenouard, A. Bernard. Extended Administration: Public-Private Management, in IFIP International Conference on Advances in Production Management Systems (APMS), Tokyo, Japon, DOI

[70] L. Rodriguez Pelliere, C. da Cunha. Effects of dynamic capabilities on frugal innovation: a conceptual framework for sustainable supply chain application, in International Conference on Production Research – ICPR, Poznan, Pologne, DOI

[71] L. Rodríguez, M. Giannakis, C. da Cunha. Investigating the Enablers of Big Data Analytics on Sustainable Supply Chain, in IPSERA, Athènes, Grèce,

[72] Z. Wang, C. da Cunha, M. Ritou, B. Furet. Comparison of K-means and GMM methods for contextual clustering in HSM, in International Conference on Changeable, Agile, Reconfigurable and Virtual Productio, Nantes, France, DOI

[73] Z. Wang, M. Ritou, C. da Cunha, B. Furet. Classification contextuelle pour système d'aide à la décision pour machines-outils, in Colloque National S-mart/AIP-PRIMECA, Les Karellis, France,

[74] P. .S.A, F. Belkadi, C. da Cunha, A. Chriette, A. Bernard. A semantic interface model to support the integration of drones in a cyber-physical factory, in International conference on Interoperability for Enterprise Systems and Applications, Tarbes, France, DOI

[75] C. da Cunha, O. Cardin, G. Gallot, J. Viaud. Designing the Digital Twins of Reconfigurable Manufacturing Systems: application on a smart factory, in IFAC Symposium on Information Control Problems in Manufacturing INCOM, Budapest, Hongrie, DOI

[76] P. .S.A, C. da Cunha. A Semantic Model for Cyber-physical production system inspired from Current developments, in CIGI-QUALITA 2021 – Conférence Internationale de Génie Industriel, Grenoble, France,

[77] P. .S.A, C. da Cunha, F. Belkadi, A. Chriette. A Requirement Engineering Framework for Smart Cyber-Physical Production System, in Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems, Aalborg, Danemark, DOI

[78] L. Wang, R. Abbou, C. da Cunha. Production Planning and Control for Sustainable Management Systems, in IFAC Manufacturing Modelling, Management and Control Conference – MIM, Nantes, France, DOI

[79] S. Tamak, Y. Eslami, C. da Cunha. Formalization and Validation of Sustainability Assessment Models for Manufacturing Organizations: A Formal Concept Analysis Approach, in SOHOMA 2023: Service Oriented, Holonic and Multi-Agent Manufacturing Systems for Industry of the Future, Annecy, France, DOI

[80] Z. Wang, M. Ritou, C. da Cunha, B. Furet. Contextual classification of chatter based on unsupervised machine learning, in 19th CIRP Conference on Modeling of Machining Operations, Karlsuhe, Allemagne, DOI

[81] L. Wang, R. Abbou, C. da Cunha. A Multi-Stage Model for Sustainable Scheduling in Hybrid Flexible Flow Shop, in 2023 9th International Conference on Control, Decision and Information Technologies (CoDIT), Rome, Italie, DOI

[82] L. Wang, R. Abbou, C. da Cunha. Production planning and control methodology for a flexible workshop problem subject to sustainability constraints, in 2024 10th International Conference on Control, Decision and Information Technologies (CoDIT), Vallette, France, DOI

[83] B. Pourabdollahian, Y. Eslami, R. Chenouard, C. da Cunha. A Correlated Redefinition of the Concept of Resilience in a Production System, in IFIP Advances in Information and Communication Technology (IFIPAICT, volume 728), Chemnitz, Allemagne, DOI

[84] S. Tamak, Y. Eslami, C. da Cunha. Exploring the Impact of Circular Strategies in Manufacturing: Can They Ensure Sustainability?, in IFIP Advances in Information and Communication Technology (IFIPAICT, volume 728), Chemnitz, Allemagne, DOI

[85] S. Tamak, Y. Eslami, C. da Cunha. A conceptual sustainability performance measurement framework for circular supply chains, in 1st International Conference on Green Innovation and Circular Economy – GRICE, Athens, Grèce,

[86] Y. Eslami, T. Brunø, C. Cunha. Manufacturing Changeability and Manufacturing as a Service, in IFAC MIM – Manufacturing modelling, management and control, Trondheim, Norvège, DOI

[87] A. Andersen, T. Brunoe, E. Worup, K. Nielsen, C. da Cunha, M. Pero, R. Andersen, F. Assef, T. Blecker, M. Osman, O. Soltmann. Manufacturing-as-a-Service (MaaS) to Increase Value Chain Resilience and Circularity: Towards a Systematic Methodology for Manufacturing Process Servitization and Value Chain Orchestration, in IFAC MIM – Manufacturing modelling, Management and Control, Trondheim, Norvège, DOI

[88] F. Abdoune, R. Andersen, A. Andersen, C. da Cunha. Cost estimation in the context of Manufacturing-as-a-Service, in IFAC MIM – Manufacturing modelling, management and control, Trondheim, Norvège, DOI

[89] C. Inghels, C. da Cunha, E. Billon-Denis, A. Trignol, A. Duclos, C. Beghin. Méthode de modélisation de la propagation de maladies infectieuses dans un environnement intérieur, in CIGI-QUALITA-MOSIM 2025, Troyes, France,

[90] B. Pourabdollahian, M. Pero, Y. Eslami, C. da Cunha. Serious Game to Promote Manufacturing as a Service Effect in Resilience of Supply Chain, in Advances in Production Management Systems, Kamakura, Japon, DOI

[91] R. Huitel, Y. Eslami, C. da Cunha, O. Remond. A Comprehensive Methodology for Assessing and Quantifying the Criticality of Component Obsolescence, in Advances in Production Management Systems, Kamakura, Japon, DOI

[92] W. Bouazza, Y. Eslami, J. Jimenez, C. da Cunha, P. Castagliola. Integrating Sustainability with Equitable Operator Fatigue Distribution, in Advances in Production Management Systems, Kamakura, Japon, DOI

[93] A. Gupta, C. da Cunha, M. Rauch, S. Touzé, H. Sapardanis. Wire Arc Additive Manufacturing for Industrial Component Repair: Challenges and Opportunities in the Computer-Aided Process Chain, in Conférence Manufacturing'21, Toulon, 1-2 avril 2026, La Garde, France,

[94] C. Wang, Z. Wang, J. Xiao, C. da Cunha. Leveraging Large Language Models and Semi-Supervised Learning for Efficient Annotation of Industrial Text Data, in 2026 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Centre Prouvé, France, DOI

[95] F. Abdoune, M. Osman, F. Basarır, H. Filik, M. Noaptes, A. Celik, U. Can, C. da Cunha. A Rule-Based Methodology for Generating and Prioritizing Feasible Reorchestration Scenarios in Manufacturing-as-a-Service, in International Conference on Control, Decision and Information Technologies (CoDIT), Bari, Italie, DOI

[96] C. Inghels, C. Beghin, C. da Cunha, E. Billon-Denis, O. Gorgé, A. Duclos. Validation of a CFD-ABM Coupling Method for Infectious Disease Transmission in an Indoor Environment: Application to a COVID-19 Outbreak in a Restaurant, in IFAC World Congress 2026, Busan (South Korea), Corée du Sud,

[97] F. Abdoune, Y. Eslami, C. da Cunha, O. Cardin. Understanding Digital Twin resilience: a conceptual analysis, in IFAC World Congress 2026, Busan, Corée du Sud,

[98] R. Huitel, Y. Eslami, C. da Cunha, O. Remond. An AI-Enhanced Resilience Framework for Obsolescence-Driven Disruptions, in IFAC World Congress 2026, Busan, Corée du Sud,

[99] S. Abdolmaleki, Y. Eslami, B. Hilloulin, E. Rozière, C. da Cunha. Attribute-Based Modeling for Life Cycle Assessment: from Linking Components to Improvement Implications, in IFAC World Congress 2026, Busan, Corée du Sud,

[100] S. Tamak, Y. Eslami, C. da Cunha. A holistic conceptual framework for performance assessment of Circular Supply Chain Management, in IFAC world Congress 2026, Busan, Corée du Sud,

[101] I. Dib, C. da Cunha, F. Felpin. Adapting the Five-Dimensional Digital Twin Model for On-Demand and Recongurable Continuous Flow Chemistry: An Ontological Approach, in Advances in Production Management Systems- APMS, Bergame, Italie, DOI

Conférences nationales avec comité de lecture et actes

[102] P. Rauffet, A. Bernard, C. da Cunha. Le pilotage d'entreprise par les capacités organisationnelles : étude de l'approche roadmapping, in Journées Nationales – Journées Doctorales MACS, Angers, France,

[103] J. Daaboul, Y. Xu, V. Vergara, J. Le Duigou, B. Chevallereau, P. Rauffet, F. Laroche, C. da Cunha, A. Bernard. Amélioration de la performance industrielle par l'ingénierie numérique, in 11ème Colloque National AIP-PRIMECA, France,

[104] P. Rauffet, C. da Cunha, A. Bernard. Vers un apprentissage organisationnel durable dans le contexte de groupe d'entreprises : comparaison du progrès fonctionnel et de la performance opérationnelle, in Colloque National AIP PRIMECA, Mont Dore, France,

[105] J. Daaboul, M. Bosch-Mauchand, C. da Cunha, A. Bernard. Configuration de processus industriels dans un contexte de produits customisés et multi-variés, in QUALITA2013, Compiègne, France,

[106] Z. Wang, M. Ritou, C. da Cunha, B. Furet. Classification contextuelle pour les fouilles de données issues de machines-outils, in 24ème Congrès Français de Mécanique (CFM 2019), Brest, France,

[107] Z. Wang, M. Ritou, C. da Cunha, B. Furet. Identification du contexte d’usinage par règles métier et modèles de mélange gaussien : application au broutement, in Conférence Manufacturing21, Angers, France,

[108] B. Pourabdollahian, Y. Eslami, R. Chenouard, C. da Cunha. Positionnement du concept de résilience pour un système de production, in 2ème Congrès Annuel de la Société d'Automatique, de Génie Industriel et de Productique (SAGIP 2024), Villeurbanne (France), France,

[109] S. Tamak, Y. Eslami, C. da Cunha. A conceptual performance measurement framework for circular supply chains, in 2ème Congrès Annuel de la Société d'Automatique, de Génie Industriel et de Productique (SAGIP 2024), Villeurbanne (France), France,

Ouvrages – Chapitres d'ouvrages et directions d'ouvrages

[110] A. Riviere, C. da Cunha, M. Tollenaere. Performances in Engineering Change Management,

[111] B. Agard, C. da Cunha. Manufacturing plant layout supported with data mining technique,

[112] P. Maropoulos, M. Chauve, C. da Cunha. Review of Trends in Production and Logistic Networks and Supply Chain Evaluation,

[113] P. Rauffet, C. da Cunha, A. Bernard. Knowledge Sharing and Communities of Practices for Intra-organizational Interoperability,

[114] P. Rauffet, M. Labrousse, C. da Cunha, A. Bernard. Sustainable Organizational Learning in Group: A Digital Double-Loop System Based on Knowledge Maturity and Performance Assessment,

[115] A. Bernard, J. Daaboul, F. Laroche, C. da Cunha. Mass Customisation as a Competitive Factor for Sustainability,

[116] Y. Bouallouche, R. Chenouard, C. da Cunha, A. Bernard. Organizational Interoperability Between Public and Private Actors in an Extended Administration, DOI

[117] C. da Cunha, N. Klement. Impact of Industrial Cyber-Physical Systems on Reconfigurable Manufacturing Systems, DOI

Theses et HDR

[118] C. da Cunha. Définition et gestion de produits semi-finis en vue d'une production de type "assemblage à la commande,

[119] C. da Cunha. Définition et gestion de produits semi-finis en vue d'une production de type assemblage à la commande,

[120] C. da Cunha. Mise en oeuvre de la personnalisation de masse : Contribution au développement d'une méthodologie outillée,

Autres publications

[121] P. Rauffet, C. da Cunha, A. Bernard. Integration de la conduite du progres dans le pilotage de la performance: developpement des capacites organisationnelles par l'apprentissage,

[122] P. Rauffet, C. da Cunha, A. Bernard. Pilotage de la performance organisationnelle: D'un modèle intuitif a un modele inductif des capacités organisationnelles,

[123] P. Rauffet, C. da Cunha, A. Bernard. L'apprentissage organisationnel : cadre de gestion, outils d'évaluation et d'amélioration,

[124] P. Rauffet, C. da Cunha, A. Bernard. IT-based modeling for organizational capability management,

[125] P. Rauffet, C. da Cunha, A. Bernard. Organizational capabilities assessment: a dynamic methodology, methods and a tool for supporting organizational diagnosis,

[126] P. Rauffet, C. da Cunha, A. Bernard. Part I – Improving performance of extended organizations with organizational capability approach: Overview, challenges and proposition for a management framework,

[127] P. .S.A, C. da Cunha, F. Belkadi, A. Bernard, A. Chriette. Model-based system engineering approach for the conception of flexible production systems, in Systems Engineering: Product, Process, Performance (Equipe IS3P) Réunion-LS2N, Nantes, France,

[128] C. Inghels, C. da Cunha, E. Billon-Denis, A. Duclos, C. Beghin. Methods and tools for biological risk assessment of naval vessels, in International conference CBRNE Research & Innovation, Strasbourg, France,

[129] W. Bouazza, Y. Eslami, J. Jimenez, C. da Cunha. Sustainable Scheduling in Manufacturing: Integrating NSGA-II and Discrete-Event Simulation for Hybrid Flowshop Environments, in CIIS 2024: 2024 The 7th International Conference on Computational Intelligence and Intelligent Systems, Nagoya, Japon, DOI

[130] C. Inghels, A. Duclos, C. Beghin, O. Gorgé, C. da Cunha, E. Billon-Denis. A decision-support tool for biological risk assessment of naval vessels: results interpretation and potential of application, in International conference CBRNE Research & Innovation, Arcachon, France,

Pas de plateformes référencées pour l’instant

Pas de logiciels de référencés pour l’instant